Digest Snooping Configuration - Huawei Quidway S3100 Series Operation Manual

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches

1.6.2 Digest Snooping Configuration

Configure the digest snooping feature on a switch to enable it to interwork with other
switches that adopt proprietary protocols to calculate configuration digests in the same
MST region through MSTIs.
I. Prerequisites
The switch to be configured is connected to a partner's switch that adopts a proprietary
spanning tree protocol. The MSTP network operates normally.
II. Configuration procedure
Table 1-35 Configure the digest snooping feature
Operation
Enter system view
Enter Ethernet port
view
Enable the digest
snooping feature
Return to system
view
Enable the digest
snooping
globally
Verify the above
configuration
Command
system-view
interface
interface-number
stp
config-digest-snooping
quit
stp
feature
config-digest-snooping
display
current-configuration
Huawei Technologies Proprietary
1-37
Chapter 1 MSTP Configuration
—
interface-type
—
Required
The digest snooping feature is
disabled on the port by
default.
—
Required
The digest snooping feature is
disabled globally by default.
You
command in any view.
Description
can execute this