Configuring Trap; Configuration Prerequisites; Configuration Tasks - Huawei Quidway S3100 Series Operation Manual

Operation Manual – SNMP
Quidway S3100 Series Ethernet Switches
Set the size of SNMP packet
that
send/receive
Set the device engine ID
Create or update the view
information

1.3 Configuring Trap

Trap is the information that the managed device initiatively sends to the NMS without
request. Trap is used to report some urgent and important events (e.g., the managed
device is rebooted).

1.3.1 Configuration Prerequisites

Complete SNMP basic configuration.

1.3.2 Configuration Tasks

Table 1-4 Configure Trap
Operation
Enter system view
Enable the device to
send Trap packets
Enable
the port
to send
Trap
packets
Operation
the Agent can
system-view
snmp-agent
[ configuration | flash | standard
[
linkdown | linkup | warmstart ]* |
system | ]
Enter port interface
view interface-number
Enable the
port to send enable snmp trap updown
Trap packets
Quit to
quit
system view
Huawei Technologies Proprietary
Command
snmp-agent packet
max-size byte-count
snmp-agent
local-engineid engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Command
trap
authentication | coldstart
interface-type
1-6
Chapter 1 SNMP Configuration
Description
Optional
By default, it is 1,500
bytes.
Optional
By default, the device
engine ID
"Enterprise Number +
device information".
Optional
By default, the view
name is ViewDefault
and OID is 1.
Description
—
enable
|
Optional
By default, the
port is enabled
to send Trap
packets.
is