Configuring The Attributes For Data To Be Sent To Radius Servers - Huawei Quidway S3100 Series Operation Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Operation
Set the status of
the
RADIUS
authentication/aut
horization server
Set the status of
the
RADIUS
accounting server
Set the status of
the
RADIUS
authentication/aut
horization server
Set the status of
the
RADIUS
accounting server

1.5.8 Configuring the Attributes for Data to be Sent to RADIUS Servers

Table 1-18 Configure the attributes for data to be sent to the RADIUS servers
Operation
Enter
view
Create
RADIUS
scheme
enter its view
Set the format
of the
names to be
sent
RADIUS
servers
Set the units of
measure
data flows sent
to RADIUS
servers
primary
state
{ block | active }
primary state primary accounting { block |
active }
secondary
state secondary authentication
{ block | active }
secondary state
{ block | active }
Command
system
system-view
a
radius
and
radius-scheme-name
user
user-name-format
{ with-domain
to
without-domain }
data-flow-format data { byte |
for giga-byte
mega-byte
{ giga-packet | kilo-packet |
mega- packet | one-packet }
Huawei Technologies Proprietary
Chapter 1 AAA&RADIUS Configuration
Command
primary authentication
secondary accounting
scheme
|
| kilo-byte |
} packet
1-24
Description
Optional
By default, all the
RADIUS servers in a
user-defined RADIUS
scheme are in the
active state; and the
RADIUS servers in
the default RADIUS
scheme "system" are
in the block state.
Description
—
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Optional
By default, the user names
sent from the switch
RADIUS servers carry ISP
domain names.
Optional
By default, in a RADIIUS
scheme, the unit of measure
for data is byte and that for
packets is one-packet.
to