Huawei Quidway S3100 Series Operation Manual page 52

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Operation
Set the
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time for
the user interface
Note that the level the commands of which are available to users logging into a switch
depends on the authentication-mode { password | scheme | none } command, the
user privilege level level command, and the service-type terminal [ level level ]
command, as listed in Table 2-9.
Command
maximum
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Huawei Technologies Proprietary
2-14
Chapter 2 Logging in through the Console Port
Description
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information in
pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if no
operation is performed in the
user interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.