Log Output To The Console - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches

1.4.3 Log Output to the Console

I. Network requirements
The switch sends the following information to the console: the log information of the two
modules ARP and IP, with severity higher than "informational".
II. Network diagram
PC PC PC PC
Figure 1-3 Networking for log output to the console
III. Configuration procedure
# Enable the information center.
<Quidway> system-view
[Quidway] info-center enable
# Enable log information output to the console. Set the severity level threshold to
informational. Permit information output from the ARP and IP modules.
[Quidway] info-center console channel console
[Quidway] info-center source arp channel console log level informational
[Quidway] info-center source ip channel console log level informational
# Enable terminal display.
<Quidway> terminal monitor
<Quidway> terminal logging
console console console console
Switch Switch Switch Switch
Huawei Technologies Proprietary
1-17
Chapter 1 Information Center