Slave Switch Configuration; Displaying And Debugging A Stack - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches
Table 1-3 Quit slave switch view
Operation
Quit slave
view

1.3 Slave Switch Configuration

Just make sure the slave switch is connected to the main switch through the stack ports.
No configuration is needed.

1.4 Displaying and Debugging a Stack

Use the display command to display the information about a stack. The display
command can be executed in any view.
Table 1-4 Display and maintain stack configurations
Operation
Display the stack
status information
on the main switch
Display the stack
status information
on a slave switch
Command
switch
quit
Command
display stacking
[ members ]
display stacking
Huawei Technologies Proprietary
1-4
Description
You can quit slave switch view
only by executing this command
in user view of a slave switch.
Description
Optional
The display command can be
executed in any view.
When being executed with the
members keyword not specified,
this command displays the main
switch and the number of switches
in the stack.
When being executed with the
members keyword specified, this
command displays the member
information of the stack, including
stack number , device name, MAC
addresses and status of the main
switch/slave switches.
Optional
The display command can be
executed in any view.
The displayed information indicates
that the local switch is a slave
switch. The information such as
stack number of the local switch,
and the MAC address of the main
switch in the stack is also displayed.
Chapter 1 Stack