Acl Configuration; Prerequisites; Creating A Basic Acl; Creating An Advanced Acl - Huawei Quidway S3100 Series Operation Manual

Operation Manual – ACL
Quidway S3100 Series Ethernet Switches

1.5 ACL Configuration

1.5.1 Prerequisites

To configure a time range-based ACL rule, you need to define the corresponding time
range first.
Note the following when you define an ACL rule with the rule number specified:
If the specified rule number identifies an existing ACL rule, the existing ACL rule
is edited.
If the specified rule number identifies no ACL rule, a new ACL rule is created.
If you define an ACL rule with the rule number not specified, a new ACL rule is created,
and the switch allocates a rule number for it automatically.

1.5.2 Creating a Basic ACL

The ACL number of a basic ACL ranges from 2000 to 2999.
Table 1-3 Create a basic ACL
Operation
Enter system view
Create
ACL
Define an ACL rule
Specify
description
Display
information

1.5.3 Creating an Advanced ACL

The ACL number of an advanced ACL ranges from 3000 to 3999.
Command
system-view
acl number
a basic
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source { sour-addr
sour-wildcard | any } ]
[ time-range time-name ]
[ fragment ]
ACL
description text
ACL display
acl-number }
Huawei Technologies Proprietary
—
By
acl-number
keyword is specified, that is,
ACL rules are matched in the
order they are created.
Required
Optional
acl { all | You can execute the display
command in any view.
1-4
Chapter 1 ACL Configuration
Description
default, the config