Prerequisites; Mst Region Configuration; Mstp Operation Mode Configuration - Huawei Quidway S3100 Series Operation Manual

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches
Operation
MSTP operation
mode
configuration
Timeout
factor
configuration
Maximum
transmitting
speed
configuration
Edge
configuration
Path
configuration
Port
configuration
Point-to-point
link
configuration
Note:
In a network that contains switches with both GVRP and MSTP employed, GVRP
packets are forwarded along the CIST. If you want to broadcast packets of a specific
VLAN through GVRP, be sure to map the VLAN to the CIST when configuring the
MSTP VLAN mapping table (The CIST of a network is the spanning tree instance
numbered 0.)

1.3.1 Prerequisites

The status of the switches in the spanning trees is determined. That is, the status (root,
branch, or leaf) of each switch in each spanning tree instance is determined.

1.3.2 MST Region Configuration

Refer to section 1.2.2 "MST Region Configuration".

1.3.3 MSTP Operation Mode Configuration

Refer to section 1.2.5 "MSTP Operation Mode Configuration".
Description
Optional
time
Optional
Optional
The default is recommended.
port
Optional
cost
Optional
priority
Optional
related Optional
Huawei Technologies Proprietary
Section
Operation
Configuration"
Section 1.2.9 "Timeout Time
Factor Configuration"
Section 1.2.10
Transmitting
Configuration"
Section 1.2.11
Configuration"
Section 1.3.7
Configuration"
Section 1.3.8
Configuration"
Section 1.2.12 "Point-to-point
Link-Related Configuration"
1-25
Chapter 1 MSTP Configuration
Related section
1.2.5 "MSTP
Mode
"Maximum
Speed
"Edge Port
"Path Cost
"Port Priority