Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches
Operation
Define the current
VLAN
Remote-probe
VLAN
Exit the
view
Enter Ethernet port
view of the Trunk
port
Configure to permit
Remote-probe
VLAN packets to
pass through the
Trunk port
Exit the
view
Configure
remote destination
mirroring group
Configure
remote destination
monitoring port
Configure
remote-probe
VLAN
remote destination
mirroring group
Display the remote
destination
mirroring
settings

1.9.5 Configuration Example

I. Network requirements
The user network is as follows:
Switch A connects with a data detect device through Ethernet1/0/2.
Command
as the
remote-probe vlan enable
current
quit
interface
interface-number
port trunk permit
remote-probe-vlan-id
current
quit
the
mirroring-group
remote-destination
the
mirroring-group
monitor-port monitor-port
the
mirroring-group
for the remote-probe
remote-probe-vlan-id
display
group remote-destination
Huawei Technologies Proprietary
Required
—
interface-type
—
vlan
Required
—
group-id
Required
Required
Do not enable STP on the
remote destination monitoring
port.
group-id
After
configured
destination monitoring port,
users cannot modify its port
type or default VLAN ID.
group-id
vlan Required
mirroring-group
Can be executed in any view.
1-18
Chapter 1 QoS Configuration
Description
a port has been
as a remote