Enabling Information Output To The Console - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches
Note:
To view the debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable the debugging function on
corresponding modules by using the debugging command.

1.2.3 Enabling Information Output to the Console

Table 1-6 lists the related configurations on the switch.
Table 1-6 Enable information output to the console
Operation
Enter system view
Enable
information center
Enable information
output
console
Define
information source
Set the format of
time stamp
To view debug/log/trap output information on the console, you should also enable the
corresponding debug/log/trap terminal display on the switch.
For example, to view log information of the switch on the console, you should not only
enable log information output to the console, but also enable logging terminal display
with the terminal logging command.
Table 1-7 Enable debug/log/trap terminal display
Operation
Enable
debug/log/trap
terminal
function
Command
system-view
the
info-center enable
info-center
to the channel { channel-number |
channel-name }
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } * { level severity |
state state } * ]
info-center
{ log | trap | debugging }
{ boot | date | none }
Command
the
terminal monitor
display
Huawei Technologies Proprietary
—
Optional
By default, the information
center is enabled.
Required
console
By default, the switch does
not output information to the
console.
source
Required
timestamp
Optional
Optional
By default, this function is
enabled for console user.
1-7
Chapter 1 Information Center
Description
Description