Information Center Configuration - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches
Module name
XM
default
Note that a slash (/) separates the module name and severity level.
5) Level
Switch information falls into three categories: log information, debug information and
trap information. Information of each category can be one of eight severities.
Information filtering prevents information whose severity is lower than the specified
threshold from being output. The higher the information severity is, the lower the
corresponding level is. For example, the "debugging" severity corresponds to level 8,
and the "emergencies" severity corresponds to level 1. When the severity threshold is
set to "debugging", all information will be output. See Table 1-2 for description of
severities and corresponding levels.
Table 1-2 Severity definitions on the information center
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Note that a slash (/) separates the level and digest.
6) Digest
It is a phrase within 32 characters, abstracting the information contents.
A colon (:) separates the digest and information contents.

1.2 Information Center Configuration

The switch supports information output to six directions.
By far, each output direction is assigned with an information channel, as shown in Table
1-3.
Module and description
Xmodem
Default settings of all the modules
Value
1 The system is unavailable.
2 Errors that need to be corrected immediately
3 Critical errors
4 Common errors
5 Warnings
6 Normal information that needs to be noticed
7 Normal prompt information
8 Debug information
Huawei Technologies Proprietary
1-4
Chapter 1 Information Center
Description