Information Center Configuration Examples; Log Output To A Unix Log Host - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches
Table 1-13 Display and debug information center
Display the settings of one or all
information channels
Display system log settings and
memory buffer record statistics
display the status of the log buffer and
the records in the log buffer
Display summary of the log buffer
Display the status of the trap buffer
and the records in the trap buffer
Clear information in the log buffer
Clear information in the trap buffer.

1.4 Information Center Configuration Examples

1.4.1 Log Output to a Unix Log Host

I. Network requirements
The switch sends the following log information in English to the Unix log host whose IP
address is 202.38.1.10: the log information of the two modules ARP and IP, with
severity higher than "informational".
II. Network diagram
Switch Switch Switch
Figure 1-1 Networking for log output to a Unix log host
III. Configuration procedure
1) Configure the switch:
# Enable the information center.
<Quidway> system-view
[Quidway] info-center enable
Operation
Network Network
Huawei Technologies Proprietary
1-13
Chapter 1 Information Center
Command
display channel [ channel-number |
channel-name ]
display info-center
display logbuffer [ unit unit-id ] [ level
severity | size buffersize ]* [ | { begin |
exclude | include } regular-expression ]
display logbuffer summary [ level
severity ]
display trapbuffer [ unit unit-id ] [ size
buffersize ]
reset logbuffer [ unit unit-id ]
reset trapbuffer [ unit unit-id ]
PC PC