Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches
Operation
Enter Ethernet port
view
monitoring port
Set the port as
monitoring port
Exit
current view
Enter Ethernet port
view
monitored port
Set the port as
monitored port
Display local port
monitoring settings

1.8.3 Configuration Example

I. Network requirements
To monitor and analyze inbound and outbound packets of ports connected to
Ethernet1/0/2 via monitoring devices.
The monitoring devices are attached to Ethernet1/0/1.
Configure as follows:
Set Ethernet1/0/2 as the monitored port. Set to monitor both its inbound and
outbound packets.
Set Ethernet1/0/1 as the monitoring port.
II. Configuration procedure
<Quidway> system-view
[Quidway] interface ethernet1/0/1
System View: return to User View with Ctrl+Z.
[Quidway-Ethernet1/0/1] monitor-port
[Quidway-Ethernet1/0/1] quit
[Quidway] interface ethernet1/0/2
[Quidway-Ethernet1/0/2] mirroring-port both
[Quidway-Ethernet1/0/2] display mirroring-group local
interface
of the
interface-number
monitor-port
from the
quit
interface
of the
interface-number
mirroring-port { inbound |
outbound | both }
display
local
Huawei Technologies Proprietary
Command
interface-type
interface-type
mirroring-group
1-13
Chapter 1 QoS Configuration
Description
—
Required
—
—
Required
inbound: Only monitors
inbound packets of the port.
outbound: Only monitors
outbound packets of the port.
both: Monitors both inbound
and outbound packets of the
port.
Can be executed in any view.