Huawei Quidway S3100 Series Operation Manual page 179

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches
Configure in Ethernet port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp point-to-point force-true
1.2.13 MSTP Configuration
I. Configuration procedure
Table 1-18 Enable MSTP in system view
Operation
Enter system view
Enable MSTP
Disable MSTP on
specified ports
Table 1-19 Disable MSTP in Ethernet port view
Operation
Enter system view
Enable MSTP
Enter Ethernet port
view
Command
system-view
stp enable
stp interface interface-list
disable
Command
system-view
stp enable
interface interface-type
interface-number
Huawei Technologies Proprietary
1-23
Chapter 1 MSTP Configuration
Description
—
Required
MSTP is disabled by default.
Optional
By default, MSTP is enabled
on all ports after you enable
MSTP in system view.
To enable a switch to operate
more flexibly, you can disable
MSTP on specific ports. As
MSTP-disabled ports do not
participate in spanning tree
generation, this operation
saves CPU resources.
Description
—
Required
MSTP is disabled by default.
—