Configuring The Supported Radius Server Type; Configuring The Status Of Radius Servers - Huawei Quidway S3100 Series Operation Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches

1.5.6 Configuring the Supported RADIUS Server Type

Table 1-16 Configure the supported RADIUS server type
Operation
Enter system view
Create a RADIUS
scheme and enter
its view
Specify the type of
RADIUS
supported by the
switch

1.5.7 Configuring the Status of RADIUS Servers

For the primary and secondary servers (authentication/authorization servers, or
accounting servers) in a RADIUS scheme:
When the switch fails to communicate with the primary server due to some server
trouble, the switch will actively exchange packets with the secondary server.
After the time the primary server keeps in the block state exceeds the time set with the
timer quiet command, the switch will try to communicate with the primary server again
when it receives a RADIUS request. If the primary server recovers, the switch
immediately restores the communication with the primary server instead of
communicating with the secondary server, and at the same time restores the status of
the primary server to the active state while keeping the status of the secondary server
unchanged.
When both the primary and secondary servers are in active or block state, the switch
sends packets only to the primary server.
Table 1-17 Set the status of RADIUS servers
Operation
Enter system view
Create a RADIUS
scheme and enter
its view
Command
system-view
radius scheme
radius-scheme-na
me
server-type
server
{ huawei
standard }
Command
system-view
radius
radius-scheme-name
Huawei Technologies Proprietary
1-23
Chapter 1 AAA&RADIUS Configuration
Description
—
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.
Optional
By default, the switch supports the
|
standard type of RADIUS server. The
type of RADIUS server in the default
RADIUS scheme "system" is huawei.
—
Required
By default, a RADIUS
scheme
scheme
"system" has already
been created in the
system.
Description
named