Configuration Example: A Switch Operating As An Ftp Client - Huawei Quidway S3100 Series Operation Manual

Operation Manual – FTP and TFTP
Quidway S3100 Series Ethernet Switches
Operation
Rename a file on a
remote host.
Switch to another
FTP user
Connect
remote FTP server
Terminate
current
connection without
exiting FTP client
view
Terminate
current
connection without
exiting FTP client
view
Terminate
current
connection
quit to user view
Terminate
current FTP control
connection
data connection
Display the on-line
help on a specified
command
concerning FTP
Enable
function

1.1.4 Configuration Example: A Switch Operating as an FTP Client

I. Network requirements
A switch and a remote PC operate as an FTP client and an FTP server.
Create a user account on the FTP server, with the user name being switch,
password being hello, and the permission to access the directory named Switch
assigned to the user account.
The IP address of a VLAN interface on the switch is 1.1.1.1. The IP address of the
PC is 2.2.2.2. And the route between the two is reachable.
Command
rename
remote-dest
user username [ password ]
to a open {
server-name } [ port ]
the
FTP
disconnect
the
FTP
close
the
FTP
quit
and
the
bye
and
remotehelp
[ protocol-command ]
verbose
verbose
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
remote-source
Optional
Optional
ip-address |
Optional
Optional
Optional
Optional
Optional
Optional
Optional
The
enabled by default.
1-6
Description
verbose function is