Huawei Quidway S3100 Series Operation Manual page 252

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Operation
Set the IP address
and port number of
the
RADIUS
accounting server
Set the IP address
and port number of
the
RADIUS
accounting server
Enable
stop-accounting
packet buffering
Set the maximum
number
transmission
attempts
buffered
stop-accounting
packets.
Set the maximum
number
continuous
no-response
real-time
accounting
requests
Command
primary
primary ip-address
[ port-number ]
secondary accounting
secondary ip-address
[ port-number ]
stop-accounting-buffer
enable
of
retry stop-accounting
of the
retry-times
of
retry
realtime-accounting
retry-times
Huawei Technologies Proprietary
Chapter 1 AAA&RADIUS Configuration
Required
accounting
By default, the IP address and
UDP port number of the primary
accounting server are 0.0.0.0 and
1813.
Optional
By default, the IP address and
UDP
secondary accounting server are
0.0.0.0 and 1813.
Optional
By
packet buffering is enabled.
Optional
By default, the system tries at
most 500 times to transmit a
buffered stop-accounting request.
Optional
By default, the switch is allowed to
continuously send at most 10
real-time accounting requests if it
gets no response.
1-20
Description
port number of
default, stop-accounting
the