Huawei Quidway S3100 Series Operation Manual page 67

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Note that if you configure to authenticate the users in the scheme mode, the command
level available to users logging into a switch depends on the authentication-mode
{ password | scheme | none } command, the user privilege level level command, and
the service-type { ftp [ ftp-directory directory ] | lan-access | { ssh | telnet |
terminal }* [ level level ] } command, as listed in Table 3-7.
Table 3-9 Determine the command level when users logging into switches are
authenticated in the scheme mode
Authentication mode
Scheme
(authentication-mode
scheme)
Scenario
User type
VTY users
that are
AAA&RADIUS
authenticated
or locally
authenticated
VTY users
that are
authenticated
in the RSA
mode of SSH
Huawei Technologies Proprietary
3-12
Chapter 3 Logging in through Telnet
Command
The user privilege
level level command is
not executed, and the
service-type command
does not specify the
available command
level.
The user privilege
level level command is
not executed, and the
se rvice-type command
speci fies the available
command level.
The user privilege
leve l level command is
executed, and the
service-type command
does not specify the
available command
level.
The user privilege
level level command is
executed, and the
service-type command
specifies the available
command level.
The user privilege
lev el level command is
not e xecuted, and the
service-type command
does not specify the
available command
level.
The user privilege
level level command is
not executed, and the
service-type command
specifies the available
command level.
Command
level
Level 0
Determined
by the
service-type
command
Level 0
Determined
by the
service-type
command
Level 0