Huawei Quidway S3100 Series Operation Manual page 377

Operation Manual – SNMP
Quidway S3100 Series Ethernet Switches
# Enable the SNMP agent to send Trap packets to the NMS whose IP address is
10.10.10.1. The SNMP community is public.
[Quidway] snmp-agent trap enable standard authentication
[Quidway] snmp-agent trap enable standard coldstart
[Quidway] snmp-agent trap enable standard linkup
[Quidway] snmp-agent trap enable standard linkdown
[Quidway] snmp-agent target-host trap address udp-domain 10.10.10.1 udp-port
5000 params securityname public
IV. Configuring NMS
The Ethernet Switch supports Huawei's Quidview NMS. SNMP V3 adopts user name
and password authentication. In [Quidview Authentication Parameter], you need to set
a user name, choose security level, and set authorization mode, authorization
password, encryption mode, encryption password respectively according to different
security levels. In addition, you must set timeout time and retry times.
Users can query and configure the Ethernet switch through the NMS. For more about it,
refer to the manuals of Huawei's NM products.
Note:
NM configuration must be consistent with device configuration; otherwise, you will fail
to perform the related operations.
Huawei Technologies Proprietary
1-9
Chapter 1 SNMP Configuration