Configuring The Association Between A Monitoring Interface And Audible And Visual Trap Devices; Establishing The Configuration Task; Configuring An Input Line - Huawei Quidway S3700 Series Configuration Manual

V100r006c00
Hide thumbs Also See for Quidway S3700 Series:
Table of Contents

Advertisement

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
Change the high or low levels of input lines 1 to 4. Traps indicating that the status of the input
lines is normal are generated.
l
l
7.3 Configuring the Association Between a Monitoring
Interface and Audible and Visual Trap Devices

7.3.1 Establishing the Configuration Task

Applicable Environment
The monitoring interface of the S3700-28TP-EI-MC connects four input lines. These four input
lines monitor the cabinet door, device power supply, battery power, and power supply of the air
conditioner. The monitoring interface also connects three output lines. These three output lines
can connect audible and visual trap devices. When an exception occurs, audible and visual trap
devices generate alarms. Based on the changes of the status of the four input lines, the S3700
controls the three output lines. The relationships between input lines and output lines can be
configured with related commands.
Pre-configuration Tasks
Before configuring a monitoring interface, complete the following tasks:
l
l
Data Preparation
To configure a monitoring interface, you need the following data.
No.
1
2

7.3.2 Configuring an Input Line

Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
When input lines 1 and 4 are of high level, traps indicating that the two input lines are
abnormal are generated; when input lines 1 and 4 are of low level, traps indicating that the
two input lines restore the normal status are generated.
When input lines 2 and 3 are of low level, traps indicating that the two input lines are
abnormal are generated; when input lines 2 and 3 are of high level, traps indicating that the
two input lines restore the normal status are generated.
The device is normally started.
The monitoring card runs normally.
Data
Normal levels of input lines 1 to 4 connected to a monitoring interface
Names of input lines
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring a Monitoring Interface
67

Advertisement

Table of Contents
loading

Table of Contents