Configuring The Endpoint Settings - 3Com VCX v7111 User Manual

The gateways port numbers are defined in the Endpoint Phone Numbers table under
the Phone Number column. For detailed information on the Endpoint Phone
Numbers table, see

Configuring the Endpoint Settings

The Endpoint Settings screens enable you to configure port-specific parameters.
Authentication
The Authentication Table (normally used with FXS gateways) defines a username and
password combination for authentication for each V7111 port.
The Authentication Mode parameter (described in
performed per port or for the entire gateway. If authentication is performed for the entire
gateway, this table is ignored.
If either the username or password field is omitted, the ports phone number (defined
in Table 39) and global password (see the Password parameter described in
19) are used instead.
To configure the Authentication Table:
Set the Authentication Mode parameter to Authentication per Endpoint.
1
Open the Authentication screen (Protocol Management menu > Endpoint Settings >
2
Authentication option); the Authentication screen is displayed.
Authentication Screen
Figure 47
In the User Name and Password fields for a port, enter the username and password
3
combination respectively.
Repeat Step 3 for each port.
4
Click Submit to save your changes.
5
138
Configuring the Endpoint Phone
3Com
Numbers).
Table 19) determines if authentication is
®
VCX V7111 VoIP Gateway User Guide
Table