3Com VCX v7111 User Manual page 439

Figure 160 Call Progress Tone Database Matches
# Recorded tone: Busy Tone (automatic configuration)
## Matches: PBX name=ITU Anguilla, Tone name=Busy tone
## Matches: PBX name=ITU Antigua and Barbuda, Tone name=Busy tone
## Matches: PBX name=ITU Barbados, Tone name=Busy tone
## Matches: PBX name=ITU Bermuda, Tone name=Busy tone
## Matches: PBX name=ITU British Virgin Islan, Tone name=Busy tone
## Matches: PBX name=ITU Canada, Tone name=Busy tone
## Matches: PBX name=ITU Dominica (Commonweal, Tone name=Busy tone
## Matches: PBX name=ITU Hongkong, China, Tone name=Busy tone
## Matches: PBX name=ITU Jamaica, Tone name=Busy tone
## Matches: PBX name=ITU Korea (Republic of), Tone name=Busy tone
## Matches: PBX name=ITU Montserrat, Tone name=Busy tone
Information related to matches of all tones recorded with the CPTWizard's internal
database. The database is scanned to find one or more PBX definitions that match all
recorded tones (that is, dial tone, busy tone, ringing tone, reorder tone and any other
manually-recorded tone – all match the definitions of the PBX). If a match is found, the
entire PBX definition is reported (as comments) in the ini file using the same format.
Figure 161 Full PBX/Country Database Match
## Some tones matched PBX/country Audc US
## Additional database tones guessed below (remove #'s to use).
#
# # Audc US, US Ringback tone
# [CALL PROGRESS TONE #5]
# Tone Type=2
# Low Freq [Hz]=450
# High Freq [Hz]=500
# Low Freq Level [-dBm]=0
# High Freq Level [-dBm]=0
# First Signal On Time [10msec]=180
# First Signal Off Time [10msec]=450
# Second Signal On Time [10msec]=0
# Second Signal Off Time [10msec]=0
•
If a match is found in the database, consider using the databases definitions
instead of the recorded definitions, as they might be more accurate.
•
For full operability of the V7111/FXO gateway, it may be necessary to edit this
file and add more Call Progress Tone definitions. Sample Call Progress Tones ini
files are available in the release package.
•
When the CPT ini file is complete, use the TrunkPack Downloadable Conversion
utility to create a loadable CPT dat file. After loading this file to the gateway,
repeat the automatic detection procedure discussed above, and verify that the
gateway detects all four Call Progress Tones correctly.
®
3Com VCX V7111 VoIP Gateway User Guide
439