3Com VCX v7111 User Manual page 48

Dial the new IP address; use the star (*) key instead of dots ("."), that is, 192*168*0*4
and press # to finish.
Review the new IP address, and press 1 to save it.
To change the subnet mask, press 2 followed by the # key.
4
The current subnet mask of the gateway is played. Press # to change it.
Dial the new subnet mask; for example 255*255*0*0 and press # to finish.
Review the new subnet mask, and press 1 to save it.
To change the default gateway IP address, press 3 followed by the # key.
5
The gateway's current default gateway address is played. To change, press #.
Dial the new default gateway address; that is, 192*168*0*1 and press # to finish.
Review the new default gateway address, and press 1 to save it.
Hang up the handset. Access the gateway's Embedded Web Server with the new IP
6
address you assigned (see
Complete the gateways configuration and save it to non-volatile memory (see
7
Configuration).
The following configuration parameters can be queried or modified using the voice menu:
Configuration Parameters Available Using the Voice Menu
Table 15
Item Number at
Menu Prompt
1
2
3
4
7
11
12
99
48
Accessing the Embedded Web
Description
IP address
Subnet mask
Default gateway IP address
Primary DNS server IP address
DHCP enable / disable
MGCP call agent IP address (N/A)
MGCP call agent port number (N/A)
Voice menu password (initially 12345).
The voice menu password can also be changed using the parameter
VoiceMenuPassword (see
Server).
Table 64).
®
3Com VCX V7111 VoIP Gateway User Guide
S aving
4