3Com VCX v7111 User Manual page 164

Note that an NFS file server can share multiple file systems. There must be a separate row
for each remote file system shared by the NFS file server that needs to be accessed by the
V7111.
To configure the NFS Settings parameters:
Open the Application Settings screen (Advanced Configuration menu > Network Settings
1
> Application Settings option); the Application Settings screen is displayed
Open the NFS Table screen by clicking the arrow sign (-->) to the right of the NFS label;
2
the NFS Table screen is displayed.
NFS Settings Table Screen
Figure 57
To add a remote NFS file system, select an available line number from the Line Number
3
drop-down list.
Click Add an Empty Line; an empty line appears.
4
Configure the NFS Settings according to
5
Click Apply New Settings; the remote NFS file system is mounted immediately. Check
6
the Syslog server for the NFS mount was successful message.
To save the changes so they are available after a power fail, see
7
To avoid terminating calls in progress, a row must not be deleted or modified while
the board is currently accessing files on that remote NFS file system.
To delete a remote NFS file system:
Select the Edit radio button for the row to be deleted.
1
Click Delete Line; the row is deleted.
2
To save the changes so they are available after a power fail, see
3
164
Table 52.
®
3Com VCX V7111 VoIP Gateway User Guide
(Figure 56).
Saving Configuration.
Saving Configuration.