3Com VCX v7111 User Manual page 131

If the coder lists of both IP and Tel Profiles apply to the same call, an intersection of
the coders is performed (that is, only common coders remain). The order of the
coders is determined by the preference.
Configure the Profiles parameters according to your requirements. For detailed
5
information on each parameter, see the description of the screen in which it is configured
as an individual parameter.
From the Coder Group drop-down list, select the coder group you want to assign to that
6
Profile. You can select the gateways default coders (see Coders) or one of the coder
groups you defined in the Coder Group Settings screen (see
Repeat Steps 2 to 6 for the second to fifth Tel Profiles (optional).
7
Click Submit to save your changes.
8
To save the changes so they are available after a power fail, see
9
ini File Tel Profile Settings
Table 37
Parameter Description
TelProfile_ID TelProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed *>,<DJBufMinDelay
*>, <DJBufOptFactor *>,<IPDiffServ
*>,<ControlIPDiffServ*>,<DtmfVolume>,<InputGain>,
<VoiceVolume>,<EnableReversePolarity>,<EnableCurrentDisconnect>,
<EnableDigitDelivery>, <ECE>, <MWIAnalogLamp>, <MWIDisplay>,
<FlashHookPeriod>, <EnableEarlyMedia*>, <ProgressIndicator2IP*>
For examples:
TelProfile_1 = FaxProfile,1,1,1,40,13,22,33,$$,$$,$$,0,0,0,1,0,0,$$,0,$$
TelProfile_2 = ModemProfile,2,2,0,40,13,$$,$$,$$,$$,$$,$$,$$,$$,0,0,0,$$,0,$$
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
IP Profile Settings
Use the IP Profile Settings screen to define up to four different IP Profiles. These Profiles are
used in the Tel to IP and IP to Hunt Group Routing tables to associate different Profiles to
routing rules. IP Profiles can also be used when working with Proxy server (set
AlwaysUseRouteTable to 1).
To configure the IP Profile settings:
Open the IP Profile Settings screen (Protocol Management menu > Profile Definitions
1
submenu > IP Profile Settings option); the IP Profile Settings screen is displayed.
®
3Com VCX V7111 VoIP Gateway User Guide
This parameter can appear up to 9 times (ID = 1 to 9).
Coder Group Settings).
Saving Configuration.
131