3Com VCX v7111 User Manual page 200

Parameter
Enable Syslog
[EnableSyslog]
SNMP Settings
For detailed information on the SNMP parameters that can only be configured using the ini file, see
71.
For detailed information on developing an SNV7111-based program to manage your devices, see
14: SNV7111-Based Management.
SNMP Managers Table
SNMP Community Strings
SNMP V3 Table
Enable SNMP
[DisableSNMP]
Trap Manager Host Name
[SNMPTrapManagerHostName]
Activity Types to Report using Activity Log Messages
The Activity Log mechanism enables the V7111 to send log messages (to a Syslog server) that report
certain types of Web actions according to a pre-defined filter.
The following filters are available:
Parameters Value Change
[ActivityListToLog = PVC]
Auxiliary Files Loading
[ActivityListToLog = AFL]
Device Reset
[ActivityListToLog = DR]
Flash Memory Burning
[ActivityListToLog = FB]
Device Software Update
[ActivityListToLog = SWU]
200
Description
Enable [1] = Send the logs and error message generated by the gateway
to the Syslog Server. If you select Enable, you must enter an IP address
in the Syslog Server IP address field.
Disable [0] = Logs and errors are not sent to the Syslog Server (default).
Syslog messages may increase the network traffic.
Logs are also sent to the RS-232 serial port (for information on
establishing a serial communications link with the V7111
gateway, see Establishing a Serial Communications Link with
the V7111 Gateway).
To configure the Syslog logging levels use the parameter Debug
Level.
See Configuring the Web User
See Configuring the SNMP Community
See Configuring SNMP V3.
Enable [0] = SNMP is enabled (default).
Disable [1] = SNMP is disabled and no traps are sent.
Defines a FQDN of a remote host that is used as an SNMP Manager. The
resolved IP address replaces the last entry in the trap manager table
(defined by the parameter SNMPManagerTableIP_x) and the last trap
manager entry of snmpTargetAddrTable in the snmpTargetMIB.
For example: 'mngr.corp.mycompany.com'.
The valid range is a 99-character string
Changes made on-the-fly to parameters.
Loading of auxiliary files (for example, using Certificate screen).
Device reset using the Maintenance Actions screen.
Burning of files / parameters to flash (for example, Maintenance Actions
screen).
cmp loading using the Software Upgrade Wizard.
3Com
Accounts.
Strings.
®
VCX V7111 VoIP Gateway User Guide
Table
Chapter