Security Settings - 3Com VCX v7111 User Manual

Saving a configuration file to flash memory may disrupt traffic on the V7111. To
avoid this, disable all traffic on the device before saving to flash memory by
performing a graceful lock (see
A device reset is required to activate a loaded CPT file.
To save the loaded auxiliary files so they are available after a power fail,
7
Configuration.
To reset the V7111 gateway, see
8

Security Settings

From the Security Settings you can:
Configure the Web User Accounts (see
Configure the Web & Telnet Access List (see
List).
Configure the Firewall Settings (see
Configure the Certificates (see
Configure the General Security Settings (see
Configure the IPSec Table (see
Configure the IKE Table (see
Configuring the Web User Accounts
To prevent unauthorized access to the Embedded Web Server, two user accounts are
available, a primary and secondary. Each account is composed of three attributes:
username, password and access level. For detailed information on the user account
mechanism, see User
It is recommended that you change the default username and password of the account you
use to access the Embedded Web Server.
To change the Web User Accounts attributes:
Open the Web User Accounts screen (Advanced Configuration menu > Security Settings
1
> Web User Accounts option); the Web User Accounts screen is displayed.
®
3Com VCX V7111 VoIP Gateway User Guide
Locking and Unlocking the Gateway
Resetting the V7111
Configuring the Web User
Configuring the Firewall
Configuring the
Configuring the IPSec
Configuring the IKE
Accounts.
Gateway.
Accounts).
Configuring the Web and Telnet Access
Settings).
Certificates).
Configuring the General Security
Table).
Table).
).
Saving
Settings).
189