3Com VCX v7111 User Manual page 168

To configure the VLAN Settings parameters:
Open the VLAN Settings screen (Advanced Configuration menu > Network Settings >
1
VLAN Settings option); the VLAN Settings screen is displayed.
VLAN Settings Screen
Figure 60
Configure the VLAN Settings according to
2
Click Submit to save your changes.
3
To save the changes so they are available after a power fail, see
4
Network Settings, VLAN Settings Parameters
Table 54
Parameter
VLAN Mode
[VlanMode]
IP Settings
Native VLAN ID
[VlanNativeVlanID]
OAM VLAN ID
[VlanOamVlanID]
168
Table 54.
Description
Sets the VLAN functionality.
Disable [0] (default).
Enable [1] .
PassThrough [2] = N/A.
This parameter cannot be changed on-the-fly and requires
a gateway reset.
Sets the native VLAN identifier (PVID, Port VLAN ID).
The valid range is 1 to 4094. The default value is 1.
Sets the OAM (Operation, Administration and Management) VLAN
identifier.
The valid range is 1 to 4094. The default value is 1.
®
3Com VCX V7111 VoIP Gateway User Guide
Saving Configuration.