3Com VCX v7111 User Manual page 204

Click Apply Row Settings to save your changes.
4
To save the changes so they are available after a power fail, see
5
SNMP V3 Setting Screen
Figure 75
To delete an SNMP V3 user, select the Index radio button corresponding to the
SNMP V3 user row entry to which you want to delete, and then click the Delete Row
button.
SNMP V3 Setting Parameters
Table 68
Parameter
Index
[Row number]
Username
[SNMPUsers_Username]
AuthProtocol
[SNMPUsers_AuthProtocol]
PrivProtocol
[SNMPUsers_PrivProtocol]
AuthKey
[SNMPUsers_AuthKey]
PrivKey
[SNMPUsers_PrivKey]
Group
[SNMPUsers_Group]
Advanced Configuration ini File Parameters
Table 69 describes the board parameters that can only be configured using the ini file.
204
Description
The table index
Name of the SNMP v3 user. This name must be unique.
Authentication protocol to be used for the SNMP v3 user.
0 = none (default)
1 = MD5
2 = SHA-1
Privacy protocol to be used for the SNMP v3 user.
0 = none (default)
1 = DES
2 = 3DES
3 = AES128
4 = AES192
5 = AES256
Authentication key. Keys can be entered in the form of a text password
or long hex string. Keys are always persisted as long hex strings and
keys are localized.
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
The group with which the SNMP v3 user is associated.
0 = read-only group (default)
1 = read-write group
2 = trap group
All groups can be used to send traps.
®
3Com
Saving Configuration.
VCX V7111 VoIP Gateway User Guide