3Com VCX v7111 User Manual page 185
Voip
Hide thumbs
Also See for VCX v7111:
- User manual (245 pages) ,
- Installation manual (58 pages) ,
- Product manual (15 pages)
Table of Contents
Advertisement
ini File Parameter Name
FaxModemBypassBasicRtpPa
cketInterval
FaxModemBypassDJBufMinD
elay
EchoCancellerAggressiveNLP Enables or disables the Aggressive NLP in the first 0.5 second of the call.
BellcoreCallerIDTypeOneSub
Standard
ETSICallerIDTypeOneSubStan
dard
ETSIVMWITypeOneStandard
BellcoreVMWITypeOneSta
ndard
StunServerDomainName
NATBindingDefaultTimeout
®
3Com
VCX V7111 VoIP Gateway User Guide
Valid Range and Description
Determines the basic frame size that is used during fax / modem bypass
sessions.
[0] = set internally (default)
[1] = 5 msec
[2] = 10 msec
[3] = 20 msec
When set for 5 msec (1), the maximum number of simultaneous
channels supported is 120.
Determines the Jitter Buffer delay during fax and modem bypass session.
The valid range is 0 to 150 msec. The default is 40.
[0] = Disabled (default)
[1] = Enabled
Selects the Bellcore Caller ID sub-standard.
[0] = Between rings (default).
[1] = Not ring related.
Selects the ETSI FSK Caller ID Type 1 sub-standard (FXS only).
[0] = ETSI between rings (default).
[1] = ETSI before ring DT_AS.
[2] = ETSI before ring RP_AS.
[3] = ETSI before ring LR_DT_AS.
[4] = ETSI not ring related DT_AS.
[5] = ETSI not ring related RP_AS.
[6] = ETSI not ring related LR_DT_AS.
Selects the ETSI Visual Message Waiting Indication (VMWI) Type 1 sub-
standard.
[0] = ETSI VMWI between rings (default)
[1] = ETSI VMWI before ring DT_AS
[2] = ETSI VMWI before ring RP_AS
[3] = ETSI VMWI before ring LR_DT_AS
[4] = ETSI VMWI not ring related DT_AS
[5] = ETSI VMWI not ring related RP_AS
[6] = ETSI VMWI not ring related LR_DT_AS
Selects the Bellcore VMWI sub-standard.
[0] = Between rings (default).
[1] = Not ring related.
Defines the domain name for the STUN server's address (used for
retrieving all STUN servers with an SRV query). The STUN client can
perform the required SRV query to resolve this domain name to an IP
address and port, sort the server list, and use the servers according to the
sorted list.
You can either use the STUNServerPrimaryIP or the
STUNServerDomainName parameter, with priority to the former
one.
Defines the NAT binding lifetime in seconds. STUN refreshes the binding
information after this time expires.
The valid range is 0 to 2592000. The default value is 30.
185
Advertisement
Table of Contents
