3Com VCX v7111 User Manual page 188

Regional Settings Screen
Figure 67
Enter the time and date where the gateway is installed.
2
Click Set Date & Time; the date and time are automatically updated.
3
After performing a hardware reset, the date and time are returned to their defaults
and should be updated.
To load a configuration file to the gateway:
Open the Regional Settings screen (Advanced Configuration menu > Regional Settings);
1
the Regional Settings screen is displayed (shown in
Click Browse adjacent to the file you want to load.
2
Navigate to the folder that contains the file you want to load.
3
Click the file and click the Open button; the name and path of the file appear in the field
4
beside the Browse button.
Click the Send File button that is next to the field that contains the name of the file you
5
want to load. An exclamation mark in the screen section indicates that the files loading
does not take effect on-the-fly (for example, CPT file).
Repeat Steps 2 to 5 for each file you want to load.
6
188
Figure 67).
®
3Com VCX V7111 VoIP Gateway User Guide