3Com VCX v7111 User Manual page 371

;SNMPManagerTableIP_0=
;SNMPManagerTrapPort_0=162
;SNMPManagerIsUsed_0=1
;SNMPManagerTrapSendingEnable_0=1
;
;SNMPManagerTableIP_1=
;SNMPManagerTrapPort_1=162
;SNMPManagerIsUsed_1=1
;SNMPManagerTrapSendingEnable_1=1
;
;SNMPManagerTableIP_2=
;SNMPManagerTrapPort_2=162
;SNMPManagerIsUsed_2=1
;SNMPManagerTrapSendingEnable_2=1
;
;SNMPManagerTableIP_3=
;SNMPManagerTrapPort_3=162
;SNMPManagerIsUsed_3=1
;SNMPManagerTrapSendingEnable_3=1
;
;SNMPManagerTableIP_4=
;SNMPManagerTrapPort_4=162
;SNMPManagerIsUsed_4=1
;SNMPManagerTrapSendingEnable_4=1
To configure the trap manger host name use the parameter SNMPTrapManagerHostName.
For example: SNMPTrapManagerHostName = 'myMananger.corp.MyCompany.com.
The same information configurable in the ini file can also be configured using the
acBoardMIB.
Configuring Trap Mangers using SNMP
The standard snmpTargetMIB interface is available for configuring trap managers.
The acBoard MIB is planned to become obsolete. The only relevant section in this
MIB is the trap sub tree acTrap.
To add an SNMPv2 trap destination, take the following step:
Add a row to the snmpTargetAddrTable with these values:
Name=trapN, TagList=AC_TRAP, Params=v2cparams, where N is an unused number
between 0 and 4.
All changes to the trap destination configuration take effect immediately.
To add an SNMPv3 trap destination, take these 2 steps:
Add a row to the snmpTargetAddrTable with these values:
1
®
3Com VCX V7111 VoIP Gateway User Guide
371