3Com VCX v7111 User Manual page 207

ini File Parameter Name
BootPRetries
BootPSelectiveEnable
BootPDelay
®
3Com VCX V7111 VoIP Gateway User Guide
Valid Range and Description
This parameter is used to:
This parameter only takes effect from the next reset of the
gateway.
Set the number of BootP requests
the gateway sends during start-up.
The gateway stops sending BootP
requests when either BootP reply
is received or number of retries is
reached.
1 = 1 BootP retry, 1 second.
2 = 2 BootP retries, 3 second.
3 = 3 BootP retries, 6 second
(default).
4 = 10 BootP retries, 30 second.
5 = 20 BootP retries, 60 second.
6 = 40 BootP retries, 120 second.
7 = 100 BootP retries, 300
second.
15 = BootP retries indefinitely.
Enables the Selective BootP mechanism.
1 = Enabled.
0 = Disabled (default).
The Selective BootP mechanism (available from Boot version 1.92)
enables the gateways integral BootP client to filter unsolicited
BootP/DHCP replies (accepts only BootP replies that contain the text
AUDC in the vendor specific information field). This option is useful in
environments where enterprise BootP/DHCP servers provide
undesired responses to the gateways BootP requests.
When working with DHCP (DHCPEnable = 1) the selective
BootP feature must be disabled.
The interval between the devices startup and the first BootP/DHCP
request that is issued by the device.
1 = 1 second (default).
2 = 3 second.
3 = 6 second.
4 = 30 second.
5 = 60 second.
This parameter only takes effect from the next reset of the
device.
Set the number of DHCP packets
the gateway sends.
After all packets were sent, if
there's still no reply, the gateway
loads from flash.
1 = 4 DHCP packets
2 = 5 DHCP packets
3 = 6 DHCP packets (default)
4 = 7 DHCP packets
5 = 8 DHCP packets
6 = 9 DHCP packets
7 = 10 DHCP packets
15 = 18 DHCP packets
207