Chapter 15: Configuration Files; Configuring The Call Progress Tones And Distinctive Ringing File; Format Of The Call Progress Tones Section In The Ini File - 3Com VCX v7111 User Manual

C 15: C
HAPTER
This section describes the configuration dat files that are loaded (in addition to the ini file) to
the gateway. The configuration files are:
Call Progress Tones file (see
Ringing File).
Prerecorded Tones file (see
FXS Coefficient file (see
User Information file (see
To load either of the configuration files to the V7111 gateway use the Embedded Web Server
(see Auxiliary Files) or alternatively specify the name of the relevant configuration file in the
gateways ini file and load it (the ini file) to the gateway (see
the ini File).

Configuring the Call Progress Tones and Distinctive Ringing File

The Call Progress Tones and Distinctive Ringing, configuration file used by the V7111
gateway is a binary file (with the extension dat) that is comprised of two sections. The first
section contains the definitions of the Call Progress Tones (levels and frequencies) that are
detected / generated by the V7111 gateway. The second section contains the characteristics
of the distinctive ringing signals that are generated by the V7111 gateway.
Users can either use, one of the supplied V7111 gateway configuration (dat) files, or
construct their own file. To construct their own configuration file, users are recommended, to
modify the supplied usa_tone.ini file (in any standard text editor) to suit their specific
requirements, and to convert it (the modified ini file) into binary format using the TrunkPack
Downloadable Conversion Utility. For the description of the procedure on how to convert
CPT ini file to a binary dat file, see
Note that only the dat file can be loaded to the V7111 gateway.
To load the Call Progress Tones (dat) file to the V7111 gateway, use the Embedded Web
Server (see Regional Settings) or the ini file (see

Format of the Call Progress Tones Section in the ini File

Users can create up to 32 different Call Progress Tones, each with frequency and format
attributes.
The frequency attribute can be single or dual-frequency (in the range of 300 Hz to 1980 Hz),
or an Amplitude Modulated (AM). In total, up to 64 different frequencies are supported. Only
eight AM tones, in the range of 1 to 128 kHz, can be configured (the detection range is
®
3Com VCX V7111 VoIP Gateway User Guide
ONFIGURATION
Configuring the Call Progress Tones and Distinctive
Prerecorded Tones (PRT)
The Coefficient Configuration
User Information File).
Converting a CPT ini File to a Binary dat
Loading the Auxiliary Files via the ini
F
ILES
File).
File).
Loading the Auxiliary Files via
File.
File).
377