Configuring Bri Trunks; Numbering System - 3Com VCX V6000 Manual

18 C 4: C
HAPTER ONFIGURING THE
Configuring BRI
Trunks

Numbering System

V6000/V6100
To configure the BRI trunks, perform these steps:
1 Enter the Home Page screen shown in
Figure 5 Home Page
All Modules are numbered consecutively from the left as a Module ID #.
All the digital devices are numbered consecutively from the left as a Trunk
#.
Within each module, digital devices are numbered consecutively from the
left as a Trunk ID #.
Figure 5 and click the Home icon.