3Com VCX v7111 User Manual page 52

Configure Enable Registration to Yes or No:
5
No = the V7111 does not register to a Proxy server/Registrar (default).
Yes = the V7111 registers to a Proxy server/Registrar at power up and every
Registration Time seconds; The V7111 gateway sends a REGISTER request according
to the Authentication Mode parameter. For detailed information about the Registration
Time and Authentication Mode parameters, see
To configure the Coders Table, click the arrow button next to Coders Table. For
6
information about how to configure the Coders Table, see Coders.
To configure the Tel to IP Routing Table, click the arrow button next to Tel to IP Routing
7
Table. For information on how to configure the Tel to IP Routing Table, see
Routing Table.
To configure the Endpoint Phone Number Table, click the arrow button next to Endpoint
8
Phone Number. For information on how to configure the Endpoint Phone Number Table,
see Configuring the Endpoint Phone
Click Reset, and then at the prompt, click OK; the V7111 gateway applies the changes
9
and restarts.
You are now ready to start using the VoIP gateway. To prevent unauthorized access to the
V7111, it is recommended that you change the username and password that are used to
access the Web Interface. See
change the username and password.
Once the gateway is configured correctly back up your settings by making a copy of
the VoIP gateway configuration (ini file) and store it in a directory on your PC. This
saved file can be used to restore configuration settings at a future time. For
information on backing up and restoring the gateways configuration, see
and Backing up the Gateway
52
Table 19
Numbers.
Configuring the Web User Accounts
Configuration.
3Com
.
for details on how to
®
VCX V7111 VoIP Gateway User Guide
Tel to IP
Restoring