Log Traps (Notifications) - 3Com VCX v7111 User Manual

Condition:
Alarm status:
Corrective Action:

Log Traps (Notifications)

This section details traps that are not alarms. These traps are sent with the severity varbind
value of indeterminate. These traps do not clear, they do not appear in the alarm history or
active tables. One log trap that does send clear is
acPerformanceMonitoringThresholdCrossing.
acKeepAlive Log Trap
Table 128
Trap:
OID:
Default Severity:
Event Type:
Probable Cause:
Trap Text:
Status Changes:
Condition:
Trap status:
Note:
acPerformanceMonitoringThresholdCrossing Log Trap
Table 129
Trap:
OID:
Default Severity:
Event Type:
Probable Cause:
Trap Text:
Status Changes:
448
Both interfaces are operational
cleared
Ensure that both Ethernet cables are plugged into the back of the system.
Inspect the systems Ethernet link lights to determine which interface is failing.
Reconnect the cable or fix the network problem
acKeepAlive
1.3.6.1.4.1.5003.9.10.1.21.2.0.16
Indeterminate
other (0)
other (0)
Keep alive trap
The STUN client in is enabled and identified a NAT device or does not locate
the STUN server.
The ini file contains the following line: SendKeepAliveTrap=1
Trap is sent
Keep-alive is sent every 9/10 of the time defined in the parameter
NatBindingDefaultTimeout.
acPerformanceMonitoringThresholdCrossing
1.3.6.1.4.1.5003.9.10.1.21.2.0.27
Indeterminate
other (0)
other (0)
"Performance: Threshold trap was set", with source = name of performance
counter which caused the trap
®
3Com VCX V7111 VoIP Gateway User Guide