3Com VCX v7111 User Manual page 153

ini File Parameter Name
FirstCallWaitingToneID
CountryCoefficients
EnableCallerIDTypeTwo
MeteringType
PolarityReversalType
®
3Com VCX V7111 VoIP Gateway User Guide
Valid Range and Description
Determines the index of the first Call Waiting Tone in the CPT file.
This feature enables the called party to distinguish between four
different call origins (for example, external vs. internal calls).
The gateway plays the tone received in the play tone
CallWaitingTone# parameter of an INFO message + the value of
this parameter - 1.
The valid range is -1 to 100. The default value is -1 (not used).
It is assumed that all Call Waiting Tones are defined in
sequence in the CPT file.
This feature is relevant only to Broadsoft's application
servers (the tone is played using INFO message).
Determines the FXO line characteristics (AC and DC) according to
country of origin.
Argentina = 0, Australia = 1, Austria = 2, Bahrain = 3, Belgium = 4,
Brazil = 5, Bulgaria = 6, Canada = 7, Chile = 8, China = 9,
Colombia = 10, Croatia = 11, Cyprus = 12, Czech_Republic = 13,
Denmark = 14, Ecuador = 15, Egypt = 16, El_Salvador = 17,
Finland = 18, France = 19, Germany = 20, Greece = 21, Guam =
22, Hong_Kong = 23, Hungary = 24, Iceland = 25, India = 26,
Indonesia = 27, Ireland = 28, Israel = 29, Italy = 30, Japan = 31,
Jordan = 32, Kazakhstan = 33, Kuwait = 34, Latvia = 35, Lebanon
= 36, Luxembourg = 37, Macao = 38, Malaysia = 39, Malta = 40,
Mexico = 41, Morocco = 42, Netherlands = 43, New_Zealand = 44,
Nigeria = 45, Norway = 46, Oman = 47, Pakistan = 48, Peru = 49,
Philippines = 50, Poland = 51, Portugal = 52, Romania = 53,
Russia = 54, Saudi_Arabia = 55, Singapore = 56, Slovakia = 57,
Slovenia = 58, South_Africa = 59, South_Korea = 60, Spain = 61,
Sweden = 62, Switzerland = 63, Syria = 64, Taiwan = 65, TBR21 =
66, Thailand = 67, UAE = 68, United_Kingdom = 69, UnitedStates
= 70, Yemen = 71
The default value is 70 (United States).
Disables the generation of Caller ID type 2 when the phone is
offhooked.
0 = Caller ID type 2 is not played.
1 = Caller ID type 2 is played (default).
Defines the metering tone (12 kHz or 16 kHz) that is detected by
FXO gateways and generated by FXS gateways.
0 = 12 kHz metering tone (default).
1 = 16 kHz metering tone.
Suitable (12 kHz or 16 KHz) coeff must be used for both
FXS and FXO gateways.
Defines the voltage change slope during polarity reversal or wink.
0 = Soft (default).
1 = Hard.
Some Caller ID signals use reversal polarity and/or wink
signals. In these cases it is recommended to set
PolarityReversalType to 1 (Hard).
Applicable only to FXS gateways.
153