Configuring The Endpoint Phone Numbers - 3Com VCX v7111 User Manual

Configure the Profiles parameters according to your requirements. For detailed
5
information on each parameter, see the description of the screen in which it is configured
as an individual parameter.
From the Coder Group drop-down list, select the coder group you want to assign to that
6
Profile. You can select the gateways default coders (see Coders) or one of the coder
groups you defined in the Coder Group Settings screen (see
Repeat Steps 2 to 6 for the second to fifth IP Profiles (optional).
7
Click Submit to save your changes.
8
To save the changes so they are available after a power fail, see
9
ini File IP Profile Settings
Table 38
Parameter
IPProfile_ID

Configuring the Endpoint Phone Numbers

From the Endpoint Phone Number Table screen you can enable and assign telephone
numbers, hunt groups (optional) and profiles to the VoIP gateway ports.
To configure the Endpoint Phone Number table:
Open the Endpoint Phone Number Table screen (Protocol Management menu >
1
Endpoint Phone Numbers); the Endpoint Phone NumberTable screen is displayed.
®
3Com VCX V7111 VoIP Gateway User Guide
Description
IPProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed
*>,<DJBufMinDelay *>, <DJBufOptFactor *>,<IpDiffServ *>,<ControlIPDiffServ
*>,<N/A use $$ instead>, <RTPRedundancyDepth>, <RemoteBaseUDPPort>,
<CNGmode>, <VxxTransportType>, <NSEMode>, <PlayRBTone2IP>,
<EnableEarlyMedia*>, <ProgressIndicator2IP*>
For example:
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,1,0
IPProfile_2 = name2,$$,$$,$$,$$,$$,$$,$$,$$,1,$$,$$,$$,$$,$$,$$,$$
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
This parameter can appear up to 9 times (ID = 1 to 9).
Coder Group Settings).
Saving Configuration.
133