Loading The Cmp File, Booting The Device; Bootp/Tftp Application User Interface - 3Com VCX v7111 User Manual

To open the BootP/TFTP:
From the Start menu on your computer, navigate to Programs and then click BootP.
3
The first time that you run the BootP/TFTP, the program prompts you to set the user
4
preferences. See Setting the Preferences

Loading the cmp File, Booting the Device

Once the application is running, and the preferences were set (see
for each unit that is to be supported, enter parameters into the tool to set up the network
configuration information and initialization file names. Each unit is identified by a MAC
address. For information on how to configure (add, delete and edit) units, see
the BootP Clients.
To load the software and configuration files:
Create a folder on your computer that contains all software and configuration files that
1
are needed as part of the TFTP process.
Set the BootP and TFTP preferences (see
2
Add client configuration for the VoIP gateway that you want to initialize by the BootP, see
3
Adding Clients.
Reset the VoIP gateway, either physically or remotely, causing the device to use BootP
4
to access the network and configuration information.

BootP/TFTP Application User Interface

Figure 145 shows the main application screen for the BootP/TFTP utility.
Main Screen
Figure 145
®
3Com VCX V7111 VoIP Gateway User Guide
for information on setting the preferences.
Setting the Preferences).
Log Window
Setting the Preferences),
Configuring
409