3Com VCX v7111 User Manual page 436

Sets port 1 offhook, dials the number of port 2, listens to the Ringback tone
3
Sets port 1 offhook, dials an invalid number, listens to the reorder tone
4
The wizard then analyzes the recorded Call Progress Tones and displays a message
5
specifying the tones that were detected (by the gateway) and analyzed (by the wizard)
correctly. At the end of a successful detection operation, the detected Call Progress
Tones are displayed in the Tones Analyzed pane (see
Figure 157 Recording Screen after Automatic Detection
All four Call Progress Tones are saved (as standard A-law PCM at 8000 bits per sample) in
the same directory as the CPTWizard.exe file is located, with the following names:
cpt_recorded_dialtone.pcm
cpt_recorded_busytone.pcm
cpt_recorded_ringtone.pcm
cpt_recorded_invalidtone.pcm
436
Figure 157).
®
3Com VCX V7111 VoIP Gateway User Guide