C 4: G S; Hapter Etting Tarted; Configuration Concepts - 3Com VCX v7111 User Manual

C 4: G
HAPTER
The V7111 gateway is supplied with default networking parameters (show in
with an application software already resident in its flash memory (with factory default
parameters).
Before you begin configuring the gateway, change its default IP address to correspond with
your network environment (see
configuration methods available on the V7111 (see
For information on quickly setting up the V7111 with basic parameters using a standard Web
browser, see Assigning an IP Address Using the Voice Menu
V7111 Default Networking Parameters
Table 14
FXS or FXO
FXS
FXO
FXS / FXO
V7111 default subnet mask is 255.255.0.0, default gateway IP address is 0.0.0.0

Configuration Concepts

Users can use the V7111 gateway in a wide variety of applications, enabled by its
parameters and configuration files (for example, Call Progress Tones (CPT)). The
parameters can be configured and configuration files can be loaded using:
A standard Web Browser (described and explained in
A configuration file referred to as the ini file. For information on how to use the ini file, see
Chapter 6: ini File Configuration of the
An SNMP browser software (see
Element Management System (EMS) (see
Manual or EMS Product Description).
To upgrade the V7111 (load new software or configuration files onto the gateway) use the
Software Upgrade wizard, available through the Web Interface (see
Wizard), or alternatively use the BootP/TFTP configuration utility (see
Gateway).
For information on the configuration files, see
®
3Com VCX V7111 VoIP Gateway User Guide
S
ETTING TARTED
Assigning the V7111 IP
Configuration
Default Value
10.1.10.10
10.1.10.11
10.1.10.10
V7111.
Chapter 14: SNV7111-Based
SNMP NAT Traversal
Chapter 6: ini File Configuration of the
Table
Address) and learn about the
Concepts).
Guidance.
Chapter 5: Web Management).
Management.)
and to the EMS Users
Software Upgrade
Upgrading the V7111
14) and
V7111.
45