3Com VCX v7111 User Manual page 196

Parameter
HTTP Authentication Mode
[WebAuthMode]
Voice Menu Password
[VoiceMenuPassword]
RADIUS General Settings
Enable RADIUS Access Control
[EnableRADIUS]
Use RADIUS for Web/Telnet
Login
[WebRADIUSLogin]
RADIUS Authentication Server IP
Address
[RADIUSAuthServerIP]
RADIUS Authentication Server
Port
[RADIUSAuthPort]
RADIUS Shared Secret
[SharedSecret]
RADIUS Authentication Settings
Default Access Level
[DefaultAccessLevel]
196
Description
Determines the authentication mode for the Embedded Web Server.
Basic [0] = Basic authentication (clear text) is used (default).
Digest When Possible [1] = Digest authentication (MD5) is used.
Basic if HTTPS, Digest if HTTP [2] = Digest authentication (MD5) is used
for HTTP, and basic authentication is used for HTTPS.
Note that when RADIUS login is enabled (WebRADIUSLogin = 1), basic
authentication is forced.
Password for the voice menu, used for configuration and status. To
activate the menu, connect an analog telephone and dial *** (three stars)
followed by the password.
The default value is 12345.
For detailed information on the voice menu, see
Using the Voice Menu Guidance.
Enables / disables the RADIUS application.
Disable [0] = RADIUS application is disabled (default).
Enable [1] = RADIUS application is enabled.
In the current version RADIUS is used only for HTTP
authentication (CDR over RADIUS is not supported).
Uses RADIUS queries for Web and Telnet interface authentication.
Disable [0] (default).
Enable [1] .
When enabled, logging to the gateways Web and Telnet embedded
servers is performed using a RADIUS server. The gateway contacts a
predefined server and verifies the given username and password pair
against a remote database, in a secure manner.
The parameter EnableRADIUS must be set to 1.
RADIUS authentication requires HTTP basic authentication,
meaning the username and password are transmitted in clear
text over the network. Therefore, users are recommended to set
the parameter HttpsOnly = 1 to force the use of HTTPS, since
the transport is encrypted.
IP address of the RADIUS authentication server.
Port number of the RADIUS authentication server.
The default value is 1645.
Secret used to authenticate the gateway to the RADIUS server. Should
be a cryptographically strong password.
Defines the default access level for the gateway when the RADIUS
(authentication) response doesn't include an access level attribute.
The valid range is 0 to 255. The default value is 200 (Security
Administrator').
3Com
Assigning an IP Address
®
VCX V7111 VoIP Gateway User Guide