3Com VCX v7111 User Manual page 429

Figure 151 Call Progress Tones Conversion Screen
Click the Select File... button that is in the Call Progress Tone File box.
3
Navigate to the folder that contains the CPT ini file you want to convert.
4
Click the ini file and click the Open button; the name and path of both the ini file and the
5
(output) dat file appears in the fields below the Select File button.
Enter the Vendor Name, Version Number and Version Description in the corresponding
6
required fields under the User Data section.
The maximum length of the Vendor field is 256 characters.
The format of the Version field is composed of two integers separated by a period .
(for example, 1.2, 23.4, 5.22).
The maximum length of the Version Description field is 256 characters.
The default value of the CPT Version drop-down list is Version 3. Do one of the following:
If the software version you are using is prior to version 4.4, select Version 1 (to
maintain backward compatibility).
If the software version you are using is 4.4, select Version 2.
Otherwise, leave the value at its default.
Check the Use dBm units for Tone Levels check box. Note that the levels of the Call
7
Progress Tones (in the CPT file) must be in -dBm units.
Click the Make File button; you are prompted that the operation (conversion) was
8
successful.
Close the application.
9
®
3Com VCX V7111 VoIP Gateway User Guide
429