Recording Screen - Automatic Mode - 3Com VCX v7111 User Manual

In the Invalid phone number field, enter a number that generates a fast busy tone when
4
dialed. Usually, any incorrect phone number should cause a fast busy tone.
Click Next.
5
The CPTWizard communicates with the FXO gateway using TPNCP (TrunkPack
Network Control Protocol). If this protocol has been disabled in the gateway
configuration, the CPTWizard does not display the next screen and an error is
reported.
Recording Screen – Automatic Mode
After the connection to the V7111/FXO gateway is established, the recording screen is
displayed.
Figure 156 Recording Screen –Automatic Mode
To start recording in automatic mode:
Click the Start Automatic Configuration button; the wizard starts the following Call Progress
Tones detection sequence (the operation takes approximately 60 seconds to complete):
Sets port 1 offhook, listens to the dial tone
1
Sets port 1 and port 2 offhook, dials the number of port 2, listens to the busy tone
2
®
3Com VCX V7111 VoIP Gateway User Guide
435