3Com VCX v7111 User Manual page 136

To configure the Hunt Group Settings table:
Open the Hunt Group Settings screen (Protocol Management menu > Hunt Group
1
Settings); the Hunt Group Settings screen is displayed.
Hunt Group Settings screen
Figure 46
From the Routing Index drop-down list, select the range of entries that you want to edit
2
(up to 24 entries can be configured).
In the Hunt Group ID field, enter the hunt group ID number.
3
From the Channel Select Mode drop-down list, select the Channel Select Mode that
4
determines the method in which new calls are assigned to channels within the hunt
groups entered in the field to the right of this field. For information on available Channel
Select Modes, see
From the Registration Mode drop-down list, select the registration mode.
5
Repeat Steps 4 and 5, for each defined hunt group.
6
Click Submit to save your changes.
7
To save the changes so they are available after a power fail, see
8
136
Table 40.
Saving
®
3Com VCX V7111 VoIP Gateway User Guide
Configuration.