3Com VCX v7111 User Manual page 194

Parameter
Protocol
[AccessList_Protocol]
Packet Size
[AccessList_Packet_Size]
Byte Rate
[AccessList_Byte_Rate]
Burst Bytes
[AccessList_Byte_Burst]
Action Upon Match
[AccessList_Allow_Type]
Match Count
[AccessList_MatchCount]
Configuring the Certificates
Use the Certificates screen to replace the server (see
client (see Client Certificates) certificates and to update the private key
(HTTPSPkeyFileName, described in
Configuring the General Security Settings
To configure the General Security Settings parameters:
Open the General Security Settings screen (Advanced Configuration menu > Security
1
Settings > General Security Settings option); the General Security Settings screen is
displayed.
194
Description
The protocol type (for example, UDP, TCP, ICMP, ESP or Any), or the
IANA protocol number (in the range of 0 (Any) to 255).
The protocol field also accepts the abbreviated strings SIP,
MGCP, MEGACO and HTTP. Specifying these strings implies
selection of the TCP or UDP protocols, and the appropriate port
numbers as defined on the device.
Maximum allowed packet size.
The valid range is 0 to 65535.
When filtering fragmented IP packets, the Packet Size field
relates to the overall (reassembled) packet size, not to the size of
each fragment.
Expected traffic rate (bytes per second).
Tolerance of traffic rate limit (number of bytes)
Action upon match (allow or block)
A read-only field that provides the number of packets accepted / rejected
by a specific rule.
Table 69).
3Com
Server Certificate Replacement) and
®
VCX V7111 VoIP Gateway User Guide