Parameter
Enable IP Security
[EnableIPSec]
Configuring the IPSec Table
Use the IPSec Table screen to configure the IPSec parameters. For detailed information on
IPSec and IKE, see
IPSec and
Configuring the IKE Table
Use the IKE Table screen to configure the IKE parameters. For detailed information on
IPSec and IKE, see
IPSec and
Configuring the Management Settings
To configure the Management Settings parameters:
Open the Management Settings screen (Advanced Configuration menu > Management
1
Settings); the Management Settings screen is displayed.
198
Description
Enables / disables the Secure Internet Protocol (IPSec) on the gateway.
Disable [0] = IPSec is disabled (default).
Enable [1] = IPSec is enabled.
IKE.
IKE.
3Com
®
VCX V7111 VoIP Gateway User Guide