Saving Changes; Entering Phone Numbers In Various Tables; Searching For Configuration Parameters - 3Com VCX v7111 User Manual

When positioning your curser over a parameter name (or a table) for more than 1 second, a
short description of this parameter is displayed. Note that parameters preceded by an
exclamation mark (!) are not changeable on-the-fly and require that the device be reset.

Saving Changes

To save changes to the volatile memory (RAM) click the Submit button (changes to
parameters with on-the-fly capabilities are immediately available, other parameter are
updated only after a gateway reset). Parameters that are only saved to the volatile memory
revert to their previous settings after hardware reset. When performing a software reset (that
is, using Web or SNMP) you can choose to save the changes to the non-volatile memory. To
save changes so they are available after a power fail, you must save the changes to the non-
volatile memory (flash).
To save the changes to flash, see

Entering Phone Numbers in Various Tables

Phone numbers entered into various tables on the gateway, such as the Tel to IP routing
table, must be entered without any formatting characters. For example, if you wish to enter
the phone number 555-1212, it must be entered as 5551212 without the hyphen (-). If the
hyphen is entered, the entry does not work. The hyphen character is used in number entry
only, as part of a range definition. For example, the entry [20-29] means all numbers in the
range 20 to 29.

Searching for Configuration Parameters

The Embedded Web Server provides a search engine that allows you to search any ini file
parameter that is configurable by the Web server. The Search button, located near the
bottom of the Main menu bar (refer to
You can search for a specific parameter (for example, EnableIPSec) or a sub-string of that
parameter for example, sec). If you search for a sub-string, the Embedded Web Server lists
all parameters that contain the searched sub-string in their parameter names.
To search for an ini file parameter configurable by the Web server:
In the Search Engine field, enter the ini parameter name or sub-string of the parameter
1
name.
Click Search. The Searched Result screen appears, listing all searched parameter
2
results.
®
3Com VCX V7111 VoIP Gateway User Guide
Saving Configuration.
Figure 22) is used to perform parameter searches.
61