Configuring Radius Accounting Parameters - 3Com VCX v7111 User Manual

Call Forward Table
Table 45
Parameter
Forward Type
Forward to Phone Number
Time for No Reply Forward
Parameter Name in ini File Parameter Format
FwdInfo_x

Configuring RADIUS Accounting Parameters

The RADIUS Parameters screen is used for configuring the Remote Authentication Dial In
User Service (RADIUS) accounting parameters.
To configure the FXO parameters, follow these steps:
Open the 'RADIUS Parameters' screen (Protocol Management menu > RADIUS
5
Parameters); the 'RADIUS Parameters' screen is displayed.
144
Description
Deactivate [0] = Don't forward incoming calls (default).
On Busy [1] = Forward incoming calls when the gateway port is busy.
Unconditional [2] = Forward any incoming call to the Phone number
specified.
No Answer [3] = Forward incoming calls that are not answered with the
time specified in the 'Time for No Reply Forward' field.
On Busy or No Answer [4] = Forward incoming calls when the port is busy
or when calls are not answered after a configurable period of time.
Do Not Disturb [5] = Immediately reject incoming calls.
Enter the telephone number or URI (number@IP address) to which the call is
forwarded.
If this field only contains telephone number and Proxy is not used, the
forward to phone number must be specified in the Tel to IP Routing
table of the forwarding gateway.
If you have set the Forward Type for this port to no reply , enter the number of
seconds the VoIP gateway waits before forwarding the call to the phone
number specified.
FwdInfo_<Port (0 to 23)> = <Forward Type>, <Forwarded SIP User
Identification>, <Timeout (in seconds) for No Reply>
For example:
FwdInfo_0 = 1,1001
FwdInfo_1 = 1,2003@10.5.1.1
FwdInfo_2 = 3,2005,30
The numbering of gateway ports starts with 0.
This parameter can appear up to 24 times for V7111 24 PORT.
®
3Com VCX V7111 VoIP Gateway User Guide